首页 > 商品中心 > 盘根系列 > CS-878 石墨碳纤增强盘根
CS-878 石墨碳纤增强盘根
产品规格:
6*6mm--50*50mm;特殊规格或各类非标准产品可按客户要求制定。 6-6mm-50-50 mm; Special specifications or all types of non-standard products can be developed according to customer requirement
应用:
石油和化工/纸浆和造纸/冶金/电力/能通用于旋转设备、往复设备和阀门上 Petroleum and chemistry/Pulp and paper making/Metallurgy/Power/Can be used in rotary equipment, reciprocating equipment and valves
特点&优点:
钝化钼酸盐缓蚀剂 Passivating molybdate corrosion inhibitor 在高温高压下形成均匀的质量 Formation of uniform mass at high temperature and high pressure 自润滑、免冲洗,减少运行成本 Self-lubricating, flushing-free, reducing operating cost 烧失量、尺寸稳定,且能补偿一般的尺寸误差 Burn loss, stable size, and can compensate for general dimension error 碳纤维增强了在高压下的抗挤压性 The carbon fiber enhances the extrusion resistance at high pressure, 化学适应性强,适用于除发烟硫酸,发烟硝酸以外的所有工作介质 Strong chemical adaptability and is suitable for all working media except for fuming sulfuric acid and fuming nitric acid 在阀门中使用时一次预紧即可不再泄漏,减少了维护工作量 When used in valves, one pre-tightening does not leak again, reducing maintenance workload 导热性好,耐热、耐压 Good thermal conductivity, heat resistance, pressure resistance 容易切割和安装 Easy to cut and install
在线咨询
产品图片仅供参考,不能作为您选型购买的依据。
App
App
服务说明
1、由密封在线发货,并提供售后服务
2、因库存实时变化,具体发货时间以实际发货为准。
售前咨询
400-0405-838
描述

CS-878 碳纤维增强石墨包覆编织盘根

些盘根是一种独特的,增强的编织盘根,在石墨包覆碳纤维增强编织盘根。在高温高压下形成均匀的质量,因此泄漏不能穿透填料组。全碳/石墨组承受较高的轴速度,同时限制轴的摩擦。

介质: 酸、原油、合成石油、溶剂、蒸汽、水
设备: 锅炉给水泵、搅拌器、混合器、结晶器、过滤器、连续蒸煮器、往复泵、活塞杆

CS-P878 Carbon Fiber Reinforced Graphite Fiber Inter-braided Packing

The packing is a unique and reinforced braided packing, and the carbon fiber reinforced braided packing is coated on the graphite. A uniform mass is formed at high temperature and high pressure, so that the leakage cannot penetrate the filler group. The full carbon/ graphite set is subject to higher shaft speeds while limiting the friction of the shaft.

Medium: acid, crude oil, synthetic petroleum, solvent, steam, water

Equipment: boiler feed pump, mixer, mould, filter, continuous cooking device, reciprocating pump, piston rod

技术参数

项目

ITEM

旋转泵

Rotating

往复泵

Reciprocating

Static

工作压力

Pressure Psi bar Kg/cm2

17 100 275

轴速

Shaft speed M/s

1.5-25

密度

Density g/cm3

1.2

温度

Temperature °C

650 ℃ 蒸汽;

450℃ 氧化状态

 -240℃

PH值

PH range

0-14



在线咨询
商品类型:
需求描述:
上传图片:
联系人:
联系电话:
数量:
提交
种类齐全 按需定制
急速配送 限时送达
质量保证 精致服务
阳光采购 质优价廉
浙ICP备19023602号-1 Copyright © 2019-2025 密封在线 版权所有
工信部网站:http://www.beian.miit.gov.cn